Top of the wire in efficiency and reliability.
A general-purpose, mild-steel, cellulose-base rod which can be used in all positions. It produces smooth medium to shallow penetration and deposits easily. This electrode performs well where there is poor joint fit-up. It is easier to clean up as medium to heavy slag can be removed easily.
Best suited for: fabrication, metal buildings and structures, machine parts, and shaft buildup.
Size - #10 (1/8")
- #12 (3/32")
5lbs / pack | 40lbs / case
A low-hydrogen iron powder electrode that creates high quality x-ray welds. Can be used in all positions on AC or DC reverse polarity current. Can weld medium grade carbon steels with no preheat, and cold rolled steels that exhibit excessive porosity.
Best for: low-alloy & steel, carbon steel, offshore rigs, power plants, and tack welds in tubular wiring.
Size - #10 (1/8") > 40lbs / case
- #12 (3/32") > 50lbs / case
5lbs / pack
An extra low carbon electrode for welding type 304L, 321, and 347 stainless steel. They have controlled ferrite in their weld deposit which provides high toughness in low temperatures. This electrode lowers the amount of chromium carbides formed in the weld metal and thus lowers risk of intergranular corrosion.
Best suited for: food and pharmaceutical equipment, and architectural fabrication.
Size - #10 (1/8")
5lbs / pack | 40lbs / case
An electrode designed for welding gray iron castings to other gray iron castings or joining them to mild steel. Welds that are done with this electrode are fairly hard and carbide tipped tools are needed for machining post-weld.
Ideal for: repairing iron castings.
Size - #10 (1/8")
5lbs / pack | 40lbs / case
The best alloy for joining dissimilar metals. Can be used in all positions to create smooth, porocity-free welds with no undercut or splatter. It has a specially balanced ferrite chemistry which allows it to serve as a stud-pulling electrode.
Best suited for: repairing and joining all ferrous steels including high-allow, stainless, and tool steels.
Size - #10 (1/8")
5lbs / pack | 40lbs / case
Low Fuming Bare Bronze (LFBB) and Low Fuming Bronze Flux Coated (LFBFC) are general-purpose, copper-based alloy brazing rods. Their low melting point makes them easily machinable and perfect for sheet metal work. High tensile strength, ductility and low fuming characteristics, making them excellent for general use.
Ideal for: gas brazing steel, copper alloys, cast iron, nickel alloys, and stainless steel.
Size
- Bare > 10lbs / pack | 30lbs / case
- Coated > 5lbs / pack | 15lbs / case
A general purpose aluminum electrode designed for arc welding aluminum alloys. It produces strong, dense welds that are free of porosity. It has a stable arc and operates at lower temperatures with minimum spatter and fuming.
Best suited for: welding heat-treated aluminum parts, production and maintenance applications. Can be used in brazing.
Size - #10 (1/8")
1lb / tube | 4lbs / case
A welding alloy that solders galvanized metal without needing flux. It is stronger than aluminum and harder than mild steel. Simple to use; can be used with only a propane torch. It has excellent corrosion resistance.
Best suited for: quick repair of all aluminum and zinc alloys.
Size - #10 (1/8")
1lb / tube | 6lbs / case
A metal-cored welding wire that exhibits the best of solid and flux-cored wires. It generates less fumes, has no slag or cold lap and has fast travel speeds.
Best suited for: applications where higher levels of manganese and silicon are required, such as with heavy mill scale, mild contaminants, or wet weld beads.
Can be used for general-purpose or high-demand projects such as welding sheet metal, pipes, and hot water heaters.
Sizes
- 0.030" | - 0.035"
A reliable and portable 140 m.s.i. welding plant with synergic control, gas and gas-less use, and advanced adaptive single IGBT technology. It fits standard 2lb & 11lb spools and can weld steel, stainless steel, copper, and aluminum. This plant has an integrated MIG torch, ground clamp and stinger.
Best suited for: use with 6013 and 7018 welding rods.
Sold single
A high quality solution for transporting gases to welding equipment. Its twin-line hoses are optimized for carrying oxygen and welding fuel gases respectively. Has BB fittings.
This Grade T welding hose are perfect for transporting alternate fuels, including: liquid propane, natural gas, propylene, and can also be used with acetylene.
Size > 3/8" x 25'
> 2/5" x 25'
Sold single
A good mild steel, rutile-coated, all-position electrode designed for use when low amp welding with sheet metal. This electrode is optimized for smaller AC welders with low open-circuit voltages.
Useful for: jobs that involve changing positions for irregular or short welds.
Size
- #8 (5/32")
- #10 (1/8")
- #12 (3/32")
1kg / pack | 20kg / case
A low-hydrogen electrode which can be used in all positions, designed for welding low-alloy, steel, and carbon steel.
Useful for: jobs that involve changing positions often and where appearance is vital.
Size - #8 (5/32")
- #10 (1/8")
- #12 (3/32")
1kg / pack | 20kg / case
Low carbon electrode used to weld stainless steel.
Size - #10 (1/8")
1kg / tube
An alloy specifically constructed for use in welding dissimilar metals together.
Size - #10 (1/8")
1kg / pack
Electrode used to weld gray iron castings together or to mild steel.
Size - #10 (1/8")
1kg / tube
A general-purpose copper-based alloy brazing rod.
Size - #10 (1/8")
1kg / tube
These efficiently constructed dark lens protect the eyesight of the user while being themself protected by the specially formulated coating on the clear lens. Clear and dark sold separately.
Dark > 25 / pack
Clear > 10 / pack
Surfactant-based sticks which are used to unload wells. These soap sticks assist in gas production by wetting water and creating a foam head which is lighter than the water.
Soap sticks and holders sold separately.
Gloves, helmets, goggles, and other welding accessories available via special order. Contact us for further inquiry.
NAVIGATION
© 2023 Impact Trading - All Rights Reserved.