🔥 Promotion 🔥
Buy 1 & Get 1 Free now on these two limited edition sandpapers!
Production Paper
A general-purpose aluminum oxide abrasive which provides a fast cut and consistent, fine finish. It has a flexible lightweight paper backing and an open coat which gives it exceptional conformability and reduces loading while in use.
Can be used in a variety of dry applications including: paint prep, wood sanding, sealer sanding, and solid surface finishing.
Size - 9" x 11"
Grit - 40 | 80 | 100
120 | 150 | 180 | 220
50 / pack
Freecut Paper
Freecut abrasives have a white stearate surface. This makes them much more difficult to fill or clog up during use. They are more aggressive than regular abrasives and last longer due to clogging resistance.
Best suited for: applications involving sticky finishes such as varnishes or resins.
Size - 9" x 11"
Grit - 180 | 280
50 / pack
3M General Sanding
Big or small, hand or machine, wet or dry - 3M has an abrasive for you.
Sanding Belts
A highly durable aluminum oxide cloth belt designed for metalworking, woodworking, and de-burring on a variety of applications on metal substrates and wood. Best suited for wide belt, edge or portable belt sanding.
Sizes
- 3" x 18"
- 3" x 21"
- 3" x 24"
- 4" x 24"
- 6" x 48"
Grades - 40, 50, 60, 80, 100, 120
10 / sleeve
CUSTOM BELTS UP TO 38" WIDTH AND ANY LENGTH AVAILABLE. CONTACT US FOR INQUIRY.
Sanding Roll
Aluminum oxide abrasive offers fast cutting and a fine, consistent finish on a broad variety of substrates. It has a X-weight cloth backing which can withstand the heavy grinding and sanding of everyday metalworking. Its resin bonding makes it last longer as it resists wear from heat.
Sizes
- 3" x 50yds
- 6" x 50yds
Grades - 40, 60, 80, 100, 120
Sold single
Sanding Disc
A sturdy aluminum oxide disc with a heavy, stiff fiber backing. The backing is highly durable and can endure even tough applications like beveling. These sanding discs offer fast cutting and a consistent finish for grinding, weld removal, and blending.
Size - 7" Disc
Grit - 16 | 24 | 36
25 / pack | sold single
331Q Wet or Dry Sandpaper
A waterproof aluminum oxide abrasive which offers high durability, flexibility, and an excellent finish. Its material combination makes hand and machine sanding quicker and easier and allows for wet applications.
Best suited for sanding metal and plastic/polyester fillers and primers.
Size - 9" x 11"
Grit - 80 | 100 | 120
180 | 240 | 280
320 | 400 | 600
50 / pack
338U Dry Sandpaper
A cost-effective aluminum oxide abrasive with a high performance ceramic mineral blend. It provides excellent cutting and durability and gives a uniform finish.
Best suited for dry sanding of fillers, primers, paintings, inks, walls, metals, and oily or humid woods.
Size - 9" x 11"
Grit - 80 | 100 | 120 | 180
240 | 320 | 400 | 600
50 / pack
Cubitron II Fibre Sanding Disc
This disc has a much longer life than the sanding disc above. It reduces change-outs and downtime and is made of 3M Precision-Shaped Grain. This allows it to maintain sharp points that cut exceptionally fast with less pressure. It is durable, wears evenly, runs cool, and has optimized mineral breakdown.
Ideal for: heavy-weight applications including beveling, blending, de-burring, finishing, heavy grinding, weld removal.
Size - 4.5" | 7" Disc
Grit - 36
50 / pack
3M Automotive Sanding
These abrasives are specially designed with automotive sanding in mind, but can conquer a variety of challenges all the same.
Cubitron II Hookit Clean Sanding Disc
A high-performance abrasive disc with hook-and-loop attachment for quickly switching between discs. It has a multi-hole pattern for extracting dust. These discs out-cut and outlast other abrasives and requires less grinding force to get results.
Ideal for dry use: paint removal, body filler shaping, fine feather-edging and final prep for blending or priming.
Size - 6" Disc
Grit
40 - 25 / pack
80 | 120 | 180 | 240
320 | 400 | 600 | 800 - 50 / pack
Cubitron II Hookit Clean Sanding Sheet Roll
Offers the same long-lasting, fast-cutting, multi-hole patterning, and hook-and-loop as the Cubitron disc, but now with kiss-cut scoring technology that makes it possible to use multiple sheet lengths and reduces waste by allowing a specific length of abrasive to be snapped off.
Best suited for dry use: paint removal, body filler shaping, fine feather-edging and final prep for blending or priming.
Size - 7cm x 12m
Grit
40 | 80 | 120 | 180
240 | 320 | 400 - 1 / pack
Cubitron II Hookit Film Disc
This disc features 3M's revolutionary Precision-Shaped Grain technology which makes it last longer and cut twice as fast as conventional abrasives. It has a film backing for excellent tear resistance and edge retention.
Can be used on a wide variety of substrates, including: all metals, composites, gel coat, wood, glass, paint, plastic, primer, and more.
Best suited for: finishing, sanding, and surface preparation.
Size - 5" Disc
Grit
80 | 120 | 180
220 | 320 | 400
50 / pack
0539-42 Hookit Green Corps Sanding Strip
A ceramic aluminum oxide blend abrasive which offers smooth sanding on rough surfaces. It has an excellent cut rate and life. It features strong paper backing, a hook and loop attachment for fast switching and open coat construction which gives it an aggressive cut and reduces dust clogging.
Best suited for dry use: plastic filler and putty shaping, paint removal, and scratch refinement on bare metal. Also suitable for fiberglass.
Size
2.75" x 16.5"
Grit
40 | 80 - 50 / pack
401Q Wet or Dry Sandpaper
A convenient sheet that can be used wet or dry on paint, primer, gel coat, and metal. Its silicon carbon mineral makes it one of the fastest-cutting abrasives with a more consistent scratch pattern.
It offers a finer range of grades than the 331Q line. Best suited for applications that require a light touch, such as auto body wet sanding or paint finishing.
Size - 5.5" x 9"
Grade - 1000 | 1200 | 1500 | 2000
50 / pack
3M Paint Finishing Abrasives
Part of the 3M Paint Finishing System, these abrasives focus on removing minor defects when compounding.
Hookit Purple Finishing Film Disc
An aluminum oxide disc with hook-and-loop attachment. It is highly conformable and durable due to its high-quality film backing and creates an easy-to-polish finish. The disc has a specially formulated coat which reduces pigtails and increases lifespan.
Best suited for dry use on: automotive paint, gel coat, and clear coat.
Can be used in: scuffing blend areas prior to painting, leveling orange peel, dust nibs, scratches, and paint runs.
Size - 6" Disc
Grit
1500 - 50 / pack
Hookit Trizact Foam Abrasive Disc
A silicon carbide abrasive with precisely patterned mineral structures that offer a fast cut and excellent finish. It has a hook and loop attachment and is long-lasting and evenly wearing.
This disc has a specially crafted foam backing which provides better control and contact with the sanding surface.
Can be used wet or dry for: removing fine sand scratches on painted surfaces, which reduces compounding time.
Size - 6"
Grit
3000 | 5000 (great for dark colored cars)
8000
15 / pack
Hookit Trizact Foam Abrasive Sheet
Features the same silicone carbide mineral, foam backing, hook and loop attachment, and precise structures as the trizact hookit foam disc prior, but now in sheet form. Ideal for applications where there are fine sand scratches and swirl marks in places where buffing would be difficult.
Can be used wet or dry for: removing fine sand scratches on painted surfaces, which reduces compounding time.
Size - 2 3/4" x 5 1/2"
Grit
3000 | 5000 (great for dark colored cars)
8000
15 / pack
3M Sanding Blocks
These sanding blocks make hand sanding less tiring and delivers consistent and efficient results.
9292 Cap Rubber Block
A rubber sanding block that provides a reliable grip when hand sanding. It creates smoother and more consistent results by giving the user better sanding control.
Simply clip on the abrasive into the slots on either side and get to sanding!
Can be used wet or dry.
10 / case
5686-7 Hookit Sanding Block
A Hookit sanding block which makes sanding challenging locations easier. They boost the efficiency and consistency of sanding by hand and are designed to reduce hand fatigue.
They have a Hookit attachment which makes it simple and easy to swap out abrasives.
Best suited for dry use.
Size
- 5686 > For sheet widths of 2.625" and lengths of 5.25".
- 5687 > For sheet widths of 2.625" and lengths of 10.75".
10 / case
Rhynogrip Redline Solutions
Rhynogrip's Redline offers a wide selection of grades to suit every application.
Redline Sandpaper
Redline sandpaper offers fast and smooth sanding for both wet and dry applications. It has a high performance abrasive grain, high flexibility and strength.
Best suited for: blending, heavy-duty sanding, sanding preparation, fine sanding and rectifying. Can be used on primers, top coats, clear coats, fiber glass and gel coat.
Size - 9 " x 11"
Grit
80 | 100 | 120 | 150
180 | 220 | 240 | 280
320 | 360 | 400 | 500
600 | 800 | 1000
1200 | 1500 | 2000 | 2500
50 / pack
Redline Disc / Strip
Redline discs and strips offer high initial cutting action, rapid stock removal, a uniform scratch pattern, high flexibility, a high strength resin bond, minimal grit shedding, a clog resistant coating and long lasting sanding.
Best suited for: blending, fine sanding, preparation, rectifying, heavy duty sanding
Disc
Size - 6"
Grit
40 | 60 | 80 | 100
120 | 150 | 180 | 220
240 | 320 | 400 | 800
2000
Strip
Size - 2.75" x 16.5"
Grit
40 | 60 | 80 | 100 | 120
3M SCOTCH-BRITE
These abrasives serve as a more flexible and versatile alternative to non woven abrasives like sandpaper.
7447 Scotch-Brite Hand Pad
This aluminum oxide pad is a more flexible and superior alternative to steel wool, wire brushes, sandpaper, and other non woven products when it comes to cleaning and finishing tasks. 7447 is long-lasting as it will never rust, will resist tearing, splintering, shredding and loading.
Can be used on: wood, metal, plastics, ceramics, porcelain, rubber, and composites.
Best suited for: cleaning, blending, finishing, de-burring, scuffing and surface preparation.
Size - 6" x 9"
20 / pack
7448 Scotch-Brite Hand Pad
This flexible silicon carbide pad performs like high quality steel wool without the shedding, rusting, or splintering. Silicon carbide breaks down faster than aluminum oxide (7447), but it produces a far superior finish.
Ideal for: ultra-fine finishes, scuffing, surface preparation, and cleaning.
Can be used on a variety of materials: metals, composite, gel coat, paint, plastic, stainless steel, etc.
Size - 6" x 9"
20 / pack
98 Scotch-Brite Delicate Surface Cleaning Pad
A light duty scouring pad designed to clean delicate surfaces. Its soft, non-woven fibers and mild abrasive clean surfaces gently but thoroughly, leaving no scratches behind. Food safe and fit for purpose.
Ideal for: cleaning ceramic, glass, and other common materials found in bathrooms, kitchens, dining areas and office spaces.
Size - 6" x 9"
20 / pack
Clean & Finish Roll
A aluminum oxide roll stock which provides uniform finishing, blending, polishing, contour finishing, and cleaning. It has an open web material which resists loading and gives a consistent cut rate. This roll can be easily be cut to fit any required length. Usable by hand or on oscillating and dual pad rubbing machines.
Can be used on: metal, wood, composite, and advanced materials.
Best suited for: finishing, sanding, surface preparation.
Size - 30ft
Sold Single
3M Metal-Working Solutions
Working with metal has never been easier than with these 3M discs.
General-Purpose Cut-Off Wheel
A durable, versatile wheel designed for tough cutting applications. It features a rigid, resin-bonded wheel for added safety and durability. Its aluminum oxide grains increase efficiency by lasting longer and cutting faster than conventional discs.
Best suited for: metal cutting applications. Can be used on carbon steel, stainless steel, aluminum, and fiberglass.
Sizes
5 / pack | 25 / case
- 14" x 1/8"
25 / pack | 100 / case
- 4 1/2" x (3/64" or 1/16" or 1/8")
- 7" x 1/16"
- 9" x 1/8"
General-Purpose Grinding Wheel
A heavy-duty depressed center wheel made for heavy grinding and stock removal. Its aluminum oxide mineral gives it fast cutting and a longer lifespan.
Can be used on a variety of substrates including carbon steel and stainless steel.
Ideal for: rough grinding applications like beveling, slag removal, weld grinding and edge work.
Sizes
All sizes 10 / pack except 4" without hub.
Without Hub
- 4" | 100 / case | 25 / pack
- 7" | 50 / case
With Hub
- 4" | 40 / case
- 7" | 20 / case
Silver Depressed Center Grinding Wheel
This wheel offers an unmatched combination of value and performance. It is fast-cutting, consistent, and has an exceptionally long life due to its precision-shaped grains. This results in less change-outs and downtime.
Can be used on a variety of substrates including aluminum, carbon steel, cast iron, non-ferrous metal, steel, tool steel, and stainless steel.
Best suited for heavy grinding, beveling, and weld removal.
Sizes
- 4" | 10 / pack
- 7" | 10 / pack
Scotch-Brite Clean and Strip XT Pro Disc
This disc has a silicon carbide abrasive mineral combined with an open nylon web. Its high-strength fibers are conformable, resistant to chunking, loading, and performs well on the edges of work-pieces.
Best suited for: removing rust, paint, mill scale, coatings and adhesives from surfaces without altering their base material.
Sizes - 4 1/2" x 7/8"
- 7" x 7/8"
10 / case
Flap Disc
A high-performance precision-shaped grain abrasive disc that is highly versatile and value-efficient. It lasts longer and cuts faster than conventional aluminum and alumina zirconia flap discs. The flaps break down during cutting which exposes fresh mineral for a constant consistent cut rate.
Best for: weld grinding, beveling, and surface prep.
Can be used on: carbon steel, stainless steel, and other heat-sensitive alloys.
Size - 4 1/2" disc
Grit - 40 | 60 | 80 | 120
10 / case
Green Corps Flexible Grinding Wheel
This disc contains 3M's specially designed ceramic abrasive grain which can be used on a broad variety of surfaces. It produces less noise and vibration when grinding and is resin bonded.
Can be used on all metals.
Ideal for: edge beveling, edge chamfering, gate removal, grinding, plate grinding, right angle grinding.
Size - 7" x 1/8"
Grit - 24
10 / pack
2 packs / case
33456 Cubitron II Cut-Off Wheel
Industrial grade disc with excellent cutting performance on mild steel and ultra high strength steel. This disc cuts faster and lasts twice as long as conventional ceramic abrasives. Its grains are extremely sharp and fast-cutting. The grains are electrostatically oriented on the abrasive surface which provides a more efficient cut and even wear.
Can be used on all metals.
Ideal for: beveling, back gouging, cutting, and weld grinding.
Size - 3" x 0.04" x 3/8"
1 / pack
6 packs / case
Cubitron II Roloc Fibre Disc
Features a stiff fibre backing, a strong resin bond, and 3M's Precision-Shaped Grains which are fast-cutting, long-lasting, and extremely uniform. Grains are electro-statically oriented on abrasive which increases cut efficiency and gives it an even wear.
Best suited for: grinding, door hem flanges, right angle grinding weld removal, and other tough metal finishing jobs.
Size - 3" disc
Grit - 36 | 60 | 80
15 / pack
Cubitron II File Belt
A best-in-class abrasive which is designed for use with a 3M File Belt Sander.
It has a long-lasting, reliable ceramic + aluminum oxide blend which makes its grains precisely-shaped and uniformly sized. This allows it to slice through hard metal quickly and run cooler. Its Cubitron II mineral reduces discoloration risk and heat related stress cracks.
Best for: grinding out rivets and spot welds.
Size - 0.5" x 13"
Grit - 36 | 60 | 80
10 / pack
5 packs / case
3M ABRASIVE TOOLS
Sanders and cutting tools for even the most niche of projects.
File Belt Sander
A light weight and maneuverable file belt sander that, in combination with the Cubitron II File Belt above, supports cutting and finishing work. It has a powerful motor which enables it to perform high intensity tasks such as collision repair.
This sander features a rotatable housing which enables it to work in cramped spaces.
Ideal for: cutting, dressing, refining spot welds, blending and finishing.
Weight > ~2lbs
Horsepower > 0.65 (485)
Max Speed > 22000 RPM
1 / pack
Cut-Off Wheel Tool
A light weight, powerful tool designed body shop applications. This tool has a composite housing which is tough and lightweight for increased comfort and better handling.
It can cut quickly and smoothly through aluminum, high strength steel, and other tough substrates during collision repair.
Designed for use with 3M Cut-Off Wheels, and optimized for the 33456 Cubitron II Cut-Off Wheel listed above.
For > 3" Discs
Weight > under 2lbs
Max Speed > 20000 RPM
1 / pack
Random Orbital Sander
This orbital sander provides high-quality surface preparation and finishing results while improving the results of any 3M Abrasive used in combination with it.
It has variable speed adjustment and multi hole back-up pad and shroud which increases dust extraction.
Size > 6"
1 / pack
Electrical Random Orbital Sander
This powerful sander is built with a precision-balanced motor and has strong, light weight composite housings. It can handle long hours and remains cool and comfortable to use when running.
It has a variable speed and is available with either a central vacuum system or non vacuum version.
Ideal for: metal fabrication, primer sanding, gel coat sanding, composite sanding, and woodworking.
Size > 6"
Voltage > 110V
Max Speed > 10000 RPM
1 / pack
Pistol Grip Sander
This sander is designed for grinding and surface preparation for collision repair.
It is powerful, fast, and has variable speed control at the trigger which increases the precision of the operator and results in less reworks.
It works with 2" and 3" discs and makes an excellent combination with the Cubitron II Roloc Fibre Discs listed above.
Weight > under 1.5lbs
Horsepower > 0.45
Max Speed > 18000 RPM
1 / pack
SGV Random Orbital Air Sander
An air-powered Random Orbital Sander with a self-generated vacuum (SGV). Its precision-balanced steel workings run smoothly and give off less vibration. This sander has increased durability, ergonomics and lower noise level to ensure comfort and control.
It exceeds the capabilities of standard electric sanders and its clean sanding filter bags limit the need for vacuum hoses.
Ideal for: finishing, grinding, and sanding.
Size > 6"
Horsepower > 0.28 (209)
Max Speed > 12000 RPM
1 / pack
Blue Demon Rods
Top of the wire in efficiency and reliability.
Blue Demon Misc.
Flux-Cored Mig Wire
A metal-cored welding wire that exhibits the best traits of both solid and flux-cored wires. It generates less fumes, has no slag or cold lap and has fast travel speeds.
Best suited for: applications where higher levels of manganese and silicon are required, such as when there is heavy mill scale, mild contaminants, or wet weld beads.
Can be used for general-purpose or high-demand projects such as welding heavy sheet metal, pipes, and hot water heaters.
Sizes
- 0.030"
- 0.035"
2lbs / coil
BlueArc Welding Plant
A reliable and portable 140 m.s.i. welding plant with synergic control, gas and gas-less use, and advanced adaptive single IGBT technology. It fits standard 2lb & 11lb spools and can weld steel, stainless steel, copper, and aluminum. This plant has an integrated MIG torch, ground clamp and stinger.
Best suited for: use with 6013 and 7018 welding rods.
Sold single
Twin Welding Hose
A high quality solution for transporting gases to welding equipment. Its twin-line hoses are optimized for carrying oxygen and welding fuel gases respectively. Has BB fittings.
This Grade T welding hose are perfect for transporting alternate fuels, including: liquid propane, natural gas, propylene, and can also be used with acetylene.
Size > 3/8" x 25'
> 2/5" x 25'
Sold single
Elarc Rods
Quality local products with over 50 years of experience in the industry.
Elarc Misc.
Bronze Brazing Flux (B-10)
A general-purpose braze-welding flux for use with all ferrous and non-ferrous metals (except for white metal).
Best suited for: torch welding, braze-welding over a wide temperature range.
Sizes
- 0.030"
- 0.035"
2lbs / coil
Aluminum Mig Wire (Alu-Mig 43)
An aluminum filler metal for use in mig welding. This wire is versatile and provides a high rate of deposition, strength, and crack resistance. It features a level-layer wound which allows for continuous and easy feeding.
Best for use on the following base metals: 3003, 3004, 5052, 6061, 6063, and cast alloys 43, 355, 356, and 214.
Sizes
- 0.030"
- 0.035"
2lbs / coil
Flux-Cored Mig Wire (Core-Master 11)
A self-shielded, flux-cored wire designed for general-purpose welding of mild and galvanizes steels. It has excellent handling across a wide voltage range due to its enhanced arc action. It has superior slag removal and can be used for either single or multi-pass welding in all positions.
Ideal for: machinery parts, tanks, general structural work, and railroad car repairs.
Sizes
- 0.030"
- 0.035"
2lbs / coil
Electrode Ground Clamp
This clamping device is specially designed to most effectively ground the electrode during the welding process.
Current Capacity
- 300 J
- 500 J
Sold single
Electrode Holder
This clamping device is designed for the utmost security when holding electrodes during the welding process. This allows the electrode to be used in a range of positions.
Current Capacity
- 300 J
- 500 J
Sold single
Soap Stick & Holder
Surfactant-based sticks which are used to unload wells. These soap sticks assist in gas production by wetting water and creating a foam head which is lighter than the water.
Soap sticks and holders sold separately.
- 144 soap sticks / case
- 10 holders / pack
Gloves, helmets, goggles, and other welding accessories available via special order. Contact us for further inquiry.
Stone Bridge / G-Force Rods
Stone Bridge rods
Mild Steel (Hero 6013)
A good mild steel, rutile-coated, all-position electrode designed for use when low amp welding with sheet metal. This electrode is optimized for smaller AC welders with low open-circuit voltages.
Useful for: jobs that involve changing positions for irregular or short welds.
Size
- #8 (5/32")
- #10 (1/8")
- #12 (3/32")
1kg / pack | 20kg / case
Low Hydro/Low Alloy (Hero 7018)
A low-hydrogen electrode which can be used in all positions, designed for welding low-alloy, steel, and carbon steel.
Useful for: jobs that involve changing positions often and where appearance is vital.
Size - #8 (5/32")
- #10 (1/8")
- #12 (3/32")
1kg / pack | 20kg / case
G-Force Misc.
Welding Lens
These efficiently constructed dark lens protect the eyesight of the user while being themself protected by the specially formulated coating on the clear lens. Clear and dark sold separately.
Dark > 25 / pack
Clear > 10 / pack
100 / case
3M DISPOSABLE RESPIRATORS
Convenient disposable masks for a range of applications.
1818 Tie-On Surgical Mask
A classic flat surgical mask designed with comfort and breathability in mind. It features a soft inner lining and convenient ear loop. It has expandable fold for full coverage and a malleable nose-piece which enables a custom fit. Best suited for general-purpose and surgical use.
50 / pack | 600 / case
9010 Particulate Respirator
This respirator filters at least 95% filtration efficiency against many non-oil based particles. It is lightweight and has a vertical flat-fold design which offers quality, reliable, and convenient worker respiratory protection. It features individual packaging which makes it easier to store.
75 / pack | 900 / case
9502 Particulate Respirator
Like the 9010, this respirator filters at least 95% of non-oil based particles, is lightweight, and has a vertical flat-fold design. What sets the 9502 apart is that it is packaged in bulk and has welded, knitted headbands which provide more comfort.
50 / pack | 500 / case
8247 Particulate Respirator
A lightweight particulate respirator contains carbon filter material which makes it the ideal option for applications where particles and nuisance levels of organic vapors are present, such as foundry operations, lab settings, agriculture, petrochemical manufacturing and undercoating.
20 / pack | 100 / case
8210 Particulate Respirator
Provides at least 95% filtration efficiency against many non-oil based particles. This respirator is designed for filtering particles produced in dusty applications such as grinding, sanding, sweeping, sawing, and bagging.
20 / pack | 160 / case
8511 Particulate Respirator
Like the 8210, this respirator filters at least 95% of non-oil based particles and is designed for dusty applications such as grinding, sanding, sweeping, sawing, and bagging. What sets the 8511 apart is its Cool Flow Exhalation Valve which significantly reduces the amount of heat buildup inside the respirator.
10 / pack | 80 / case
3M Special Order Respirators
8212 Particulate Welding Respirator
This respirator is designed for use in welding and other operation wherein metal fumes are present. It also protects against non-oil based particles and is resistant to caking of particles on its surface. Features a Cool Flow Valve which reduces heat inside mask.
Best suited for use in: welding, brazing, torch cutting, soldering, and metal pouring.
8214 Particulate Vapor Respirator
Like the 8212 this mask is designed for use in applications like welding where metal fumes are present and has a Cool Flow Valve. However, this mask has additional features such as being flame resistant and having carbon filter media which lowers exposure to organic vapors.
9105 Particulate Flexible Respirator
Protects against non-oil based particles. What sets this respirator apart is its specially designed folds which contain enhanced filter media and V-shaped pleats which expand to allow for easier breathing and flexes with talking and other movements.
9205 Aura Particulate Respirator
Protects against non-oil based particles. What sets this respirator apart is its specially designed folds which contain enhanced filter media and V-shaped pleats which expand to allow for easier breathing and flexes with talking and other movements.
Its stand-out feature is that it belongs to the Aura Series, which means it has specially optimized airflow control for the purpose of reducing eye wear fogging.
9211 Aura Particulate Respirator
Protects against non-oil based particles. This respirator features the optimized airflow control of the Aura series, comfortable braided headbands, adjustable nose clips, a soft inner material, and a curved contour to create a better seal around the nose and eyes and to allow for more room for eye wear.
What separates it from the 9205 is that it features a Cool Flow Valve, keeping heat to a minimum and making it more comfortable to be worn for longer periods of time.
8246 Particulate Acid Gas Respirator
This respirator provides protection against both oil and non-oil based particles. It has increased durability due to its collapse resistant shell and offers a secure seal. Its specialty lies in reducing nuisance levels of acid gases due to its carbon layer.
This makes it excellent for use in: chemical processing, glass etching, paper processing, aluminum smelting, and brewing operations.
8822 Cup Particulate Respirator
Protects against hazards such as dust, mist, smoke and fumes. Features lightweight construction and a Cool Flow Valve which increases comfort and allows mask to be worn for a longer period of time. Has extremely low breathing resistance due to Advanced Electret Filter Media. Reduces eye-wear fogging and fits perfectly due to its flexible nose clip.
10 / pack | 60 / case
3M REUSABLE RESPIRATORS
Filters, retainers, and cartridges for these reusable masks are sold separately (see next section).
6200 Half Face Mask
An economic, low-maintenance, easy-to-use, and lightweight respirator. It has a twin filter design so as to prevent obstruction of vision and to evenly distribute its weight. Its bayonet connection fitting system allows it to be used with a broad range of filters to add further protection as necessary.
1 / pack | 24 / case
7502 Half Face Mask
This mask distinguishes itself from the 6200 by vastly improving comfort and cooling. It has a soft sealing surface and special Cool Flow Valve which minimizes the build-up of heat inside the respirator by reducing its resistance to breathing, thus making it more comfortable for longer usage
1 / pack | 10 / case
6800 Full Face Mask
A lightweight, well-balanced, full-face respirator. It features a wide, durable lens for visibility and eye protection, as well as a soft and conformable silicone face seal.
Like the 7502, it has a Cool Flow Valve, but what sets this mask above the rest is its unique center adapter which directs exhaled air and moisture down while also preventing dirt and debris buildup in the valve.
1 / pack | 4 / case
3M Respirator Apparatus
Add these filters and cartridges to get the protection you need for any environment.
501 Filter Retainer
This retainer is designed to hold 5N11 and 5P71 Particulate Filters. It works with the 6000 series of Cartridges (including 6001 & 6006 listed below).
10 pairs / pack | 5 packs / case
5N11 Particular Filter
This polyester filter is NIOSH-approved for dealing with only NON-OIL based particles. 5000 series filters like the 5N11 are designed to work with 3M Gas/Vapor Cartridges (listed below) alongside the 501 Filter Retainer.
10 / pack | 100 / case
5P71 Particular Filter
This polyester filter is NIOSH-approved for handling both OIL and NON-OIL based particles. 5000 series filters like the 5P71 are designed to work with 6000 series Cartridges (listed below) alongside the 501 Filter Retainer.
10 / pack | 100 / case
2091 HEPA Particular Filter
An exceptional filter which protects against a broad range of both OIL and NON-OIL contaminants. It has Advanced Electret Media (AEM) which makes it light, comfortable, and enhances breathability. Its electrostatic media enhances the capture of airborne particles and reduce breathing resistance. Compatible with all re-usable respirators and cartridges listed.
1 pair / pack | 50 pairs / case
6001 Organic Vapor Cartridge
Protects against organic vapors only. This cartridge uses carbon particles to absorb contaminants, thus filtering the air being breathed. It swept-back design enhances field of vision and comfort. The layers and depth of the carbon bed and size of the particle body are designed to make this cartridge as long-lasting as possible. Compatible with all re-usable respirators and filters listed.
1 pair / pack | 30 pairs / case
6006 Multi Gas/Vapor Cartridge
Offers the same field of vision and comfort, as well as long-lasting optimization as the 6001. However, the 6006 is superior as it offers protection against not only organic vapors like the 6001, but additionally protects against acid gases, ammonia, methyl-amine, and formaldehyde. Compatible with all re-usable respirators and filters listed.
1 pair / pack | 30 pairs / case
60921 Organic Vapor Cartridge + Filter
An exceptional cartridge which protects against organic gases and vapors. This cartridge reduces the steps needed for assembly as it already contains an in-built P100 filter which protects against both OIL and NON-OIL based contaminants. Compatible with all re-usable respirators listed.
1 pair / pack | 30 pairs / case
3M Respirator Fit Test
Make sure your respirator is fitted correctly with this fit test kit.
FT-10 Qualititative Fit Test (Sweet)
A sweet tasting sodium saccharin fit test kit for respirators. It includes: hood, collar, 2 nebulisers, sweet tasting sensitivity solution, sweet tasting fit test solution and laminated instructions. Used to check face to respirator seal on any disposable particulate respirator or re-usable respirator with a particulate filter.
1 kit / pack
3M EYE-WEAR
Keep your eyes safe with these tough impact-rated poly-carbonate lens.
Virtua Eye-Wear
A value-efficient and ANSI-approved eye protection solution which offers an unobstructed viewing and lightweight construction for added comfort. Its hard coat poly-carbonate lens make it durable and long-lasting.
Stocked in both clear and dark.
Sold Single | 20 / case
334 Splash Goggles
A dependable and economical clear eye protector which protects against liquid/droplet splash. It has a highly durable and sturdy poly-carbonate lens, as well as an adjustable elastic strap and a wide opening which allows it to fit comfortably over prescription eye-wear. Its ventilation system keeps air circulating which minimizes fogging.
Sold Single | 10 / case
Safety Supplies
Hard Hat
This dielectric hard hat features a low profile, well-balanced, high density polyethylene shell with patented shock-absorbing hangers which absorb shock evenly. Optimized for comfort and a secure fit, it has universal accessory slots, a sponge padded sweatband and a down-angled nape strap. Meets ANSI standards - Type 1 Impact / Class E Electrical.
Colors
- White - Grey - Blue - Red
- Yellow - Green - Orange
3M X3A Peltor Earmuffs
These high-preformance earmuffs are designed for maximum comfort and noise reduction for jobs where loud sounds are common. They feature an adjustable cup which angles to create a custom fit for each wearer, as well as a twin-band design which reduces heat build-up.
3M 4510 Protective Coverall
This comfortable and flexible coverall protects wearers from liquid splashes as well as hazardous dusts. It offers cost-efficient and reliable coverage and protection during a variety of tasks.
Can be used in many industries, including but not limited to: construction, sanitation, and food safety.
Sizes - L / XL
25 / case
Safety Vest
Safety vests stocked in three different materials: mesh, solid, or solid mesh. Available in lime or orange.
Sizes - S / M / L / XL
3M Comfort Grip Gloves
General-purpose gloves with a nitrile palm coating which makes them light, flexible, abrasion-resistant, and longer lasting than cotton or latex palm-coated gloves. They are washable, durable, and offer excellent grip in wet and oily conditions. Ideal for general material handling, working with small parts, electrical component assembly, carpentry, plumbing, and roofing.
Sizes - M / L / XL
6 / pack
Double-Palm Leather Gloves
These high-quality gloves feature an A/B grade cowhide split, wing thumb, knuckle strap, comfortable cotton-lined palm, rubberized safety cuff, cotton binding, and elastic closure sewn inside - all of which add enhanced comfort and safety.
Can be used in: construction, material handling, and general maintenance.
12 / pack
Water Boots
Watertight PVC boots with a vulcanized rubber sole. They are resistant to oils and fats and meet ANSI specifications. Welts are specially designed to provide traction in wet and muddy conditions.
Sizes
- 6, 7, 8, 9, 10, 11, 12, 13
Stocked in tall and short.
3M 6050+ Nomad Scraper Matting
6050+ mats have durable vinyl loop traps which hold dirt and sand so that the surface stays clean and tidy. It has a foam backing which makes it comfortable to step on and lessens wrinkling, flipping, and sliding.
Colors
- Ebony (Black) - Chestnut (Brown)
- Slate (Grey) - Forest (Green)
- Red
Sizes
- 18" x 24"
- 2' x 3'
- 3' x 20' (roll)
3M 7920 Cushion Wrap
A transparent polyethylene / nylon wrap which provides excellent cushion protection for valuable and delicate items during mailing, shipping, and storage. It is lightweight, neat, non-scratching, and recyclable.
12 / case
3M Road Markers
Keep drivers aware of hazards or lines even in the worst of environmental conditions.
290 Raised Pavement Markers (RPM)
Durable and highly visible, the permanent adhesive and micro-prismatic optics of the 290 series RPMs provide long-lasting and excellent reflectivity wet or dry, day or night. It has a rumble effect for added awareness, making it the perfect option for marking sharp curves, gore areas, lane delineation, and other asphalt or concrete applications.
Colors
- White / Red
- White / White
🔥 Promotion! 🔥
Buy 1 Get 1 Free on Production & Freecut Paper!
Learn more about them on our Abrasives page.